MTP fiber jumper is in order to meet the needs of higher broadband and the birth of a new type of fiber jumper, a MTP multi core connector can meet the requirements of 8 to 144 core. The twin core fiber can support fast, and the application of Gigabit Gigabit, but do not use special encoding and protocol, support 40G and 100G dual core fiber is difficult, so the normal 40G and 100G optical fiber communication network requires 8 core fiber and 20 core fiber, and MTP fiber jumper can meet the high-speed network the requirements of application in small space. So how to select and apply MTP fiber jumper? Following Ansett news will introduce you to the MTP optical fiber jumper two high density wiring solutions, and recommend some popular products for your reference.
A, MTP backbone fiber jumper
Both ends of the MTP backbone optical fiber jumper are MTP connector, can be directly used to connect 40 or 100G devices, are widely used in the 10G to 40/100G data center upgrades, the cable diameter of the default 3.0mm, branch cable diameter of 0.9mm, 2.0mm and other models available, can meet the different needs of wiring. MTP optical fiber jumper has very low insertion loss and reflection loss, compact design, good performance, commonly used in high density data center environment, fiber to the building (FTTB) and optical fiber connectors and other equipment internal wiring environment.

1, 12 core single-mode 9/125MTP bundle backbone fiber jumper
2, the 12 core MTP (male head) 10G million multimode (OM4) high density push-pull trunk fiber jumper

A, MTP branch fiber jumper
MTP branch optical fiber jumper refers to the MTP connector and fiber optic cable after the production of various forms of MTP jumper. Through the branch, MTP jumper MTP connector with the other end of the LC, SC, FC and other connectors with the most extensive application of LC. Through the cross type pre connection MTP technology, MTP branch optical fiber jumper is connected to one end of the 40G or 100G, the other end of the connection 10G, a 40 or 100G into a few 10G, 40G or 100G high-speed connection. MTP-LC optical fiber jumper because of its large number of cores, compact design, small size and other characteristics, can be applied to many existing DC environments, such as between the switch panel and the main distribution frame, wiring board and so on.

1, 12 core MTP (female) -6LC duplex 10GOM350/125 fan type bundle fiber jumper
2, 24 core MTP (female) -12LC duplex 9/125 fan type bundle fiber jumper

Ansett news provides a variety of jumpers, including conventional optical fiber jumper, armored fiber jumper, MPO/MTP fiber jumper and fiber pigtail; there are a variety of types, cable sheath material, optional connector type, meet various optical connections on demand. Cable types including single-mode and multimode ((OS2) 62.5/125OM1,50/125OM2,10G laser and optimization of OM3 and OM4); sheath types are PVC, OFNP and LSZH armored available; connector with simplex / duplex LC, FC, SC, ST, MU, MTRJ, E2000, and optical fiber jumper for services to meet your specific requirements the.

下一页：没有了

上一页：How to choose the high density optical fiber pre connection system of data center -- the development and application of MPO/MTP